bing tracking image

Hyundai Elantra Accessories and Parts Installation And Review Videos

     

Roadmaster Single Park Light Diode Installation - 2016 Hyundai Elantra- Video

Roadmaster Single Park Light Diode Installation - 2016 Hyundai Elantra

Today we're going to be taking a look at a great use for the Roadmaster Park Light Diode. This is part number RM-690. We're working on a Hyundai Elantra today. This vehicle requires that the key be in accessory mode while it's being dinghy towed. What that means is some of the accessories are going to be on and they're going to be draining the battery. What we're going to be able to do is tap into our running light wire coming from our motor home. When the park lights are turned on, that sends power through the wire back to the lights in the car. We're going to use our diode to access that power so that wire will not only send the power back to the lights in the back. more


Watch Video

12/10/2015 3:32:20 PM



Roadmaster Flexo-Coil Kit Installation - 2013 Hyundai Elantra- Video

Roadmaster Flexo-Coil Kit Installation - 2013 Hyundai Elantra

Today on our 2013 Hyundai Elantra we'll be installing the Roadmaster 7-wire to 6-wire Flexo-Coil Kit Part Number RM-146-7. We'll begin here on the front of our towed vehicle. You'll notice that there's already a 4 flat here as well as another indicator light wire as this vehicle has an InvisiBrake installed on it. The black wire sends the LED lights as well as an audible light up into the motorhome telling you that your breaks are working. We're going to actually install all 5 of these wires into the 6-way. Now onto the two vehicle of the motorhome vehicle in the 7-way. more


Watch Video

1/16/2014 1:30:05 PM



Yakima Roof Rack Fairing Review - 2013 Hyundai Elantra- Video

Yakima Roof Rack Fairing Review - 2013 Hyundai Elantra

Today, on our 2013 Hyundai Elantra, well be test fitting the 44-inch Fairing for Yakima Roof Rack Crossbars, Part Number Y07048. Now, to begin our test fit, well first undo the black wing nut at the end of the fairing to bring the brackets around the front crossbar. Well then re-insert the allen bolt and thread on our wing nut to secure one side of the fairing to the crossbar.Well then push on the other brackets and then go over to the other side of the vehicle, where we will again loosen up the black wing nut and remove the bolt, set the bracket on the crossbar, and then secure it again with the bolt and wing nut. And that completes todays test fit for the 44-inch Fairing for Yakima Roof Rack Crossbars, Part Number Y07048 on our 2013 Hyundai Elantra. more


Watch Video

5/29/2013 4:10:13 PM



  1